To ensure that you get the right boiler and central heating system for your home we can arrange for one of our engineers to visit when it suits you. Our adviser will give you a free, detailed quotation, not an estimate, which is tailored specifically to your needs.
We recommend that you have your boiler serviced once a year. This will ensure that it is working at maximum performance and safety.
This usually means you have a sludge build up in the bottom of the radiator. This can be resolved by power flushing the system. However, before taking any action we recommend that you seek expert advice to identify the cause of the sludge first, for example you may have a water leak.
This usually means that your central heating system is incorrectly balanced. This results in the hot water not flowing evenly to each radiator. We suggest that you have an expert check your central heating system.
Older combination boilers often have a lower flow rate than newer models. This can be made worse by a build up of scale in the boiler over time. In this situation we suggest that you have an expert check your boiler and central heating system.
A Thermostatic Radiator Valve allows you to control the temperature in individual rooms around your home. It can also help you reduce your fuel bills by automatically adjusting the radiator temperature once your room has reached its desired level.
You can save up to 40% on your heating bills but this depends on the size of your home, how often you use your heating system what insulation you have in your home and the type of boiler you have fitted.We offer free site surveys where we can assess your requirements and give you a more accurate idea of what you could save.
The installation of a new system does involve new pipe work being fitted along with heating controls being installed. We aim to ensure that disruption to your home is kept to a minimum, we will keep you updated on our progress every step of the way.
Yes, we employ our own team of highly skilled and fully qualified engineers, all of which have to be registered with CORGI.
Gas Safe Register replaced the CORGI gas register in Great Britain and the Isle of Man on 1 April 2009. Although CORGI will still be recognised as an accreditation for gas central heating engineers in the short term, Gas Safe is the official accreditation. It is run by Capita - the same company responsible for the congestion charge.
Benchmark is an initiative launched to improve quality within the heating industry. All competent heating installers should be aware of benchmark standards. Virtually every boiler sold in the uk comes with its own log book which should be fully completed by the installer and handed to you once your new boiler has been installed and commissioned. This log book becomes your certificate of compliance with all relevant building regulations and also is your guarantee. No certificate no guarantee.
Quite a few changes will be taking place over the next 12 months, being corgi registered alone won't be enough. Planning permission for boiler and central heating installation will be required unless:
1) The company installing your central heating can self certify the installation.
2) Corgi will be notified of every boiler and central heating installation in England.
3) Corgi will send a certificate of compliance to you and also inform the building control body (the council).
1) In 2007 the government brought in the home buyers pack to put all the responsibility on the seller of the house to provide certificates - ensuring gas and electric services all comply with current regulations and standards.
2) All boiler manufacturers will not provide warranty if the home owner does not have their letter of compliance from Corgi.
3) The installation may also be unsafe.
We can advise you on what boiler is suitable for your property. But to answer the question. . .
There are 3 different types of high-efficiency condensing boiler:
1.Combi
2.Regular
3.System
A regular boiler is often also referred to as a "traditional" or "conventional" boiler.
Each type delivers all the benefits of high-efficiency technology, but which one you choose will depend on several factors, including your property, your lifestyle and the professional advice of engineer.
The high efficiency condensing combi or combination boiler is an ingenious space-saving idea, and an increasingly popular choice in UK homes. In fact, combis now account for well over half of all the new domestic boilers installed in Britain every year.
The major difference between a combi and any other type of boiler is that a combi eliminates the need to store hot water -- so no hot water cylinder in the airing cupboard. It is both a high-efficiency water heater and central heating boiler, combined (hence the name) within one compact unit which usually sits in the kitchen or utility room, or sometimes in the airing cupboard. The space savings result from the fact there is no hot water storage cylinder, cold water storage cistern or other familiar components of a regular (conventional) heating system.
The further benefits of this are a significant saving on hot water costs, and the fact that hot water is delivered through your taps or shower at mains pressure. So you can enjoy powerful showering without the need for a pump. Another combi benefit is that it can generally save you money on installation time and costs -- no tanks in the roof space means less pipe work and a shorter installation time.
|
